Power & Hand Tools

• Dual air chambers provide for both dust collection during use and provide suction to the wall
• Dust port fits Bosch 1-3/8-Inch vacuum nozzle and can convert to 1-1/4- Inch / 2-Inch hose nozzles
• Replaceable brush ring provides seal for multiple bit diameters
• Rubber seal maintains suction to wall
• Optimized for drilling diameters from 5/8-Inch to 1-3/8-Inches, but can accommodate up to 2-1/2-Inchs if the brush ring is removed

• Remove up to 200 sq. ft. per hour of vinyl or other related soft material (Square footage amounts and time schedules will vary based on material and adhesion)
• Folding handle for easy transport & storage
• Sharktooth wrench for easy blade changes
• Heavy-duty steel material deflector shield
• Multiple position hand held assembly
• Heavy-duty flexible rubber isolators
• Belt-driven oscillating blade system provides 1,850 oscillating hits per minute
• Quick release pin angle adjustment
• 7-Gauge steel welded construction
• Push plate & built-in weight make material removal a quick & easy job

• Made from solid steel for a lifetime of trouble-free service
•  Building materials are protected by the roller's smooth surface and rounded corners
• All rollers float independently on the axle to compensate for inconsistencies
• Yoke and handle are painted to prevent rusting
• Designed to provide the ultimate in practicality
• Will make your repair perfect down to the last detail

• Use to slice glue-down carpet into strips
• Use for rough cutting of carpet off the roll
• Sharp, hardened point that lifts the carpet into the blade
• Heavy-duty handle is adjustable and double locks for safety
• Use hook or utility blades

The deluxe trimmer is designed for trimming all types of carpet at the wall for tucking between the baseboard and tack strip. This model features top-

loading blade carries to make changing the blade faster and easier, as well as an open throat design for smoother cutting action.

• Top-loading blade carriers for easy blade changes
• Wide open throat for smooth cutting action
• Comes with six shims for height adjustment
• Visual throat adjustment for different carpet thicknesses
• Uses standard trimmer blades

Comes complete with push-button stretch lock, Auto-Lok tube, 3 extension tube sections, 1 transfer tube section, folding tail block and carrying case. Adjusts from 37" to 22 ft. and can be lengthened by adding additional extension tubes . The stretcher has an adjusting knob on the top of the power unit with a visual depth setting gauge. Just set the dial to the desired pin depth and you're ready to stretch.

This tool provides a simple means of stretching stairs and forming carpet around the stair

nosing. Hook the claw on the stair and pull the handle down. The pulling action of the gripper

teeth stretchers the carpet across the stair, while the bottom side tucks it up under the stair

nose. Recesses in the bottom edge make for easy stapling. The stair claw makes a tough job

easier!

• Five setting length adjustment channel that extends from 17-1/2 to 21-1/2 inches
• Recessed trigger locks to desired length with three nap grips and 16 adjustable steel pins

• Sets carpet into tack strips, drives carpet into gullies, and creases carpet into stairway crevices and along wall lines
• Forged, chrome-plated steel for long lasting strength and durability with a slip-resistant handle for safe use
• 4 inches wide for faster carpet tucking
• Checkered head prevents hammer from slipping when securing the carpet

• Super low profile and ultra-narrow handle of the iron make it easy to get the seam together near the back of the iron
• Dual indicator lights show power and heating status
• Self cleaning Teflon coated base and 12 feet long cord
• Grooved bottom
• Heat range is 220 degrees to 425 degrees Fahrenheit
• 110 volts, 800 watt

https://www.grainger.com/ec/pdf/Conduit-Bender-Guide.pdf

24” Length

Center Cut

30” Length

Center Cut

• Equipped with locking handle that has quick release feature for easy transport
• Power Lock bar provides crisp bends without oil canning/warping
• Cam locking system consists of aluminum cam and ultra high molecular weight polyethylene wedge
• Includes two military grade aluminum castings
• Dual support base rails for extra foundation
• Traditional hinge "auto-measures" 3/4" hem
• Bending handle is ideal for bending and hemming full length 8ft.+ pieces
• Powder-coat finish provides protection from the elements, while eliminating UV fading and oxidation
• Full 150° bending radius for simple hemming
• Powerlock bar for stronger clamping pressure
• 14" throat depth

• Equipped with locking handle that has quick release feature for easy transport
• Power Lock bar provides crisp bends without oil canning/warping
• Cam locking system consists of aluminum cam and ultra high molecular weight polyethylene wedge
• Includes two military grade aluminum castings
• Dual support base rails for extra foundation
• POWERslot hinge "auto-measures" 5/8" hems
• Bending handle is ideal for bending and hemming full length 8ft.+ pieces
• Increased bending radius for simple hemming
• Bends up 180° Hems for complex bend profiles
• Powerlock bar for stronger clamping pressure
• 14" throat depth

Applicable Materials: Steel

Grip Material: Steel

Duty: Heavy Duty

Type: Tensioner

Tool Type: Feed Wheel

Applicable Materials: Steel

Grip Material: Steel

Duty: Heavy Duty

Type: Tensioner

Tool Type: Push